2000 A AC/DC Utility Clamp Meter

FLIR CM94

Go to Product Support
product image

The FLIR CM94 tackles high-current measurements on demanding utility and industrial job sites. This rugged meter securely clamps larger conductors with an oversized jaw so you can take readings up to 2000 A AC & DC. With a CAT IV-1000 V safety rating, the CM94 is ready to work on overhead, underground and utility service equipment. Plus, it offers VFD mode to tackle noisy signal environments. The full-featured FLIR CM94 utility clamp meter delivers results for utility and industrial electricians.

Improved safety for high-current testing

  • Designed for safety so you can focus on results

    Get the right tool for high-current work with a CAT IV 1000 V protection rating and the ability to read up to 2000 A.

  • Functions you need to work faster & smarter

    This full-featured clamp meter with True RMS, LoZ, and VFD modes ensures accurate troubleshooting optimized for utility and industrial work.

  • Built with features to simplify your workflow

    The oversized 55 mm jaw helps the ergonomic FLIR CM94 clamp around large conductors or multiple conductors at once

Specifications
Overview
Backlight LCD
Yes
Jaw Opening
2.2" (55mm)
Warranty
Limited 3 years
Size [L × W × H]
269 x 106 x 51 mm (10.6 x 4.2 x 2.0 in)
Compliance & Certifications
Certifications
UL, CE, CSA, RCM
Environmental
Drop test
2 m
Operating Temperature
14 °F to 122 °F (-10 °C to 50 °C)
Temperature
Range -58 to 1832 °F (-50 to 1000 °C) / Basic Accuracy ±0.3%
Measurement & Analysis
AC Current
Range 200.0, 2000 A / Basic Accuracy ±2%
AC Voltage (Digital Low Pass Filter-VFD)
Range 1000 V / Basic Accuracy ±2%
AC/DC Current
Range 2000 A / Basic Accuracy ±2%
AC/DC Voltage
Range 1000 V / Basic Accuracy ±1.2% / 0.5%
Capacitance
Range 60.00 nF, 600.0 nF, 6.000 uF / Basic Accuracy ±2.0% Range 60.00 uF, 6000.0 uF / Basic Accuracy ±3.5% Range 2000 uF / Basic Accuracy ±4%
Category Rating
CAT IV-1000 V
Clamp-On DC Current
Range 200.0, 2000 A / Basic Accuracy ±2%
Continuity
10 to 200 Ω
Diode
Range 1 V / Basic Accuracy ±1%
Frequency
Range 40.00 Hz to 400.0 Hz (ACA) / Basic Accuracy ±1% Range 50.00 Hz to 400.0 Hz (ACV) / Basic Accuracy ±1%
LoZ Mode AC Voltage
Range: 6.000, 60.00, 600.0, 1000 V Basic Accuracy: ±1.5%
LoZ Mode DC Voltage
Range: 6.000, 60.00, 600.0, 1000 V Basic Accuracy: ±1.3%
Resistance
Range 600.0, 6.000 K, 60.00 KΩ / Basic Accuracy ±0.5% Range 600.0 KΩ / Basic Accuracy ±0.8% Range 6.000 MΩ / Basic Accuracy ±1.2% Range 40.00 MΩ / Basic Accuracy ±2.3%
True RMS
Yes
Meter Data
Auto Power Off
34 minutes
Display
3-5/6 digits 6000 counts. 3-1/2 digits 1999 counts for Hz
NCV
Yes
Power
Battery
2 x AA
Media Gallery
Contact Sales

Want more information on this product?

Call +852 27928955 to speak with a knowledgeable specialist.

Related Documents
Export Restrictions

Export Restrictions

The information contained in this page pertains to a dual use product controlled for export by the Export Administration Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.

FLIR CM94