-
Extech VPC260-ADPTR
9V/2A Universal adapter for VPC260 6-Channel Particle Counter
-
Car Charger (T198482)
This cable is used to power the infrared camera from the 12 V socket in a car.
-
Handstrap (T131757ACC)
Hand strap for the FLIR G-Series Optical Gas Imaging Cameras (Gx320, G620, Gx620, G346, G343, G306, G304). Approved for hazardous environments.
-
Extech FL705
The Extech FL705 is an easy to clean, rugged ExStik® Replacement Fluoride Electrode Module. For use with Extech® Model FL700 Fluoride Meter. This module measures fluoride and temperature, featuring ATC via a built-in Pt-100-Ohm sensor.
-
Extech EC405
The Extech EC405 is an ExStik® Replacement Conductivity Cell Module. For use with the EC400 Conductivity/TDS/Salinity Meter. It is an easy to clean, rugged conductivity cell module. Product comes with a protective connector cap and a one year warranty.
-
Extech 850190
The Extech 850190 is a Thermistor Temperature Probe replacement for the 341350A-P conductivity meter. Featuring a 0°C to 90°C (32°F to 194°F) measuring range.
-
Extech CL204
Extech CL204 are ExTab Chlorine Reagent tablets (100pk-1000 tests) for the CL200 Chlorine Meter. Foil packaging provides a very stable environment with a long shelf life. It comes with no messy powder reagents for hassle free calibration of your Extech meter. No dosing equipment is required.
-
Extech MO290-P
The MO290-P is a Moisture Pin Probe for use as spares or replacement probes with select Extech Moisture Meters (MO290/MO295/MO297/MO300). Includes two durable, sharp, 0.4" (1cm) length pins assembled on probe.
-
Extech MO290-PINS-HP
The Extech MO290-PINS-HP is a pack of spare or replacement pins for the MO290-HP Moisture Hammer Probe. Product includes 20 4 cm (1.6 in) long pins. Two locking nuts are also included to secure pins to the probe.
-
Extech PQ3210
The Extech PQ3210 is a set of three flexible 1200 Amp flex clamps for the Extech PQ3350 3-Phase Power and Harmonics Analyzer. These probes are 304 mm (12 in) long for wrapping around busbars.
-
Extech PT300
The Extech PT300 is a Pressure Transducer for 300 PSI measurements with the SDL700 Pressure Meter/Datalogger and 407495 Heavy Duty Pressure Meter with Interchangeable Transducers. For air or non-corrosive/non-ionized gas. 6.4 mm (0.25 in) PS, 19 teeth per 2.5 cm/ 1 in with 1.2 m/ 3.9 ft cable.
-
Extech 461937
The Extech 461937 is a set of spare Reflective Tape, coming in packs of 10. For use with any non-contact tachometer.